Nathaniel G. Lambeth, Sr. Custom Ammunition

Hunting Ammunition

I load custom ammunition for Big and Dangerous Game using only the best components available. I like bonded core and/or controlled expansion projectiles such as the Swift Scirocco, and A-Frame, the Nosler Accubond, and Partition, Barnes X, Triple Shock, and MX bullets, Solids, and the Speer Trophy Bonded and the Bear Clawbullets.

I like deep penetration and exit wounds. Varmint ammunition is loaded in two varieties one hyper velocities, rapid explosive expansion bullets for ricochette control and the other as full metal jacket/hard ball for less fur damage. All hunting ammunition is new or inspected once fired cases that are full length sized, cleaned inside and out and trimmed to SAAMI spec. All primer pickets are cleaned and preimum brand primers used. I use Dupont IMR, Hogdon, Reloader, Vitavori, Winchester powder, hand measured to a .1 grain.

Rifle Target Ammunition

I load Cross the course ammunition for both service rifle and match rifle, long range, Palma, F-Class TR and Open. I load with Lapua, Winchester, Federal, Remington, Norma, Nosler, Lake City Match, IMI and other brass. I primarily load target rifle ammunition with Lapua, Sierra, Hornady, Nosler, Berger Bullets. I use CCI BenchRest , Federal Gold Match, Winchester, Remington, or Russian primers. I use Dupont IMR, Hogdon, Reloader, Vitavori, Reloader and Winchester powders. Rifle Ammunition is full length sized, cleaned inside and out. Primer pockets are cleaned and inpsected. Powders are measured to within +/- .2 or better. Bench rest ammunition and Long Range ammunition is loaded to .01. All are final inspeced and case gauge tested.

Handgun Ammunition

I load from 221Fireball through 500 Smih and Wesson for hunting or target shooting. All hand gun ammunition is inspected, full length sized and deprimed, cleaned in a vibratory cleaned, roll sized, primer pockets swaged, reprimed, charged with powder to +/- .2 grain, then the bullet seated. Only the best components are used. I load Jacketed, plated, hard cast and swaged pistol bullets as specified. Loaded ammunition is final inspected and case gauged.

Ammunition Loading Policy

All ammunition is inspected before, during, and after loading. All loaded ammunition will be tested in a steel case gauge. All loaded ammunition is loaded to manufactures specifications and/or SAAMI specs. I prefer to work with the customer and test the ammunition in their firearm before the entire lot is loaded. I assist customers in locating the best prices on components. I do not sell the ammunition components I only provide the loading machinery, expertise, and labor. You provide the components and I produce the loaded ammunition.

This page is under construction

Insert body text here...

Insert body text here ...